- Support Center
- Tutorials
- Maintenance and Service
How to install Hard Drives/SSD into Drive Tray
1. Have hard drive, tray, (4) screws [These are hard drive specific], Phillips screwdriver
2. Insert hard drive with connectors facing towards the back of the tray
3. Align drive with back of tray. There should be a gap between the latch side and the hard drive
**SSD/2.5" Drives Will be using only one side of the tray and will have a larger gap.
4. Add screws into tray
**SSD/2.5 will use the bottom screws only